IEC

IEC Standards are put forth by the International Electrotechnical Commission to enforce global compliance with accepted technical standard for electronics.

Testing Standards

Description

This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification.

Standard

IEC 60512-11-4

Testing For

Connectors for electronic equipment

Description

This part of IEC 60749 provides a test procedure for determining the ability of semiconductor devices and components and/or board assemblies to withstand mechanical stresses induced by alternating high and low temperature extremes. Permanent changes in electrical and/or physical characteristics can result from these mechanical stresses.

Standard

IEC 60749-25

Testing For

Semiconductor devices

Description

This part of IEC 61300 describes a procedure to determine the suitability of a fiber optic device to withstand the effects of a change of temperature or a succession of changes of temperature.

Standard

IEC 61300-22-2

Testing For

Fiber optics

Description

This International Standard lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1. It applies only to crystalline silicon modules types. A standard for thin-film modules has been published as IEC 61646.

Standard

IEC 61215

Testing For

Crystalline silicon terrestrial photovoltaic (PV) modules Solar Panel Testing

Description

This International Standard specifies requirements and gives guidelines for the exposure and removal of weaknesses in hardware and software items for the purpose of reliability growth.

Standard

IEC 61014 - Programs for Reliability Growth

Testing For

It applies when the product specification calls for a reliability growth program of equipment (electronic, electromechanical and mechanical hardware as well as software) or when it is known that the design is unlikely to meet the requirements without improvement.

Description

IEC 62133 is the most important standard for exporting Lithium-Ion batteries, including those used in IT equipment, tools, laboratory, household and medical equipment.

Standard

IEC 62133

Testing For

Portable sealed Secondary Batteries - Laptops, Toys, Radio, etc.

Description

This part of IEC 60068 provides a test to determine the ability of components, equipment or other articles to withstand rapid changes of ambient temperature. The exposure times adequate to accomplish this will depend upon the nature of the specimen.

Standard

IEC 60068-2-14

Testing For

Components, equipment orother articles to withstand rapid changes of ambient temperature

Newsletter Signup

Click to sign up for Qualmark's newsletter.

Signup

Request for Information

Click to request additional information from Qualmark

Request Information

Locate Testing Labs

Click to locate the nearest testing lab to you.

Locate a Lab